Hydraulic Seals


Applied Seals Co. Ltd. was established in 1990. we have rich gifts manufacturing experience, and our product range is related to Hydraulic Seals and so on. Relying on our professional talent and good experience in this field, we acquire a great achievement and have been regarding as one of the best manufacturers in Taiwan.

Hydraulic Seals

1 Mpa = 10 Bar, 1 Bar = 14.5 psi, 1 Mpa = 145 psi

UA2
UA2

Double Lip Rod Wiper
This seal prevents entry of dust, and protects equipment by maintaining sealing performance of the packing. It can be fitted into an integrated groove. It's a double-lip all rubber wiper seal that prevents oil scraping off.
Material : NBR/FKM
Working Temperature: -35°C~+80°C/-10°C~+150°C
Surface Speed : ≦1.0m/s

UA4
UA4

 

TPU Double Lip Rod Wiper
This seal prevents entry of dust, and protects equipment by maintaining sealing performance of the packing. It can be fitted into an integrated groove. It's a double-lip all rubber wiper seal that prevents oil scraping off.

Material : ESTER TPU
Working Temperature: -30°C~+80°C
Surface Speed : ≦1.0m/s

UC6
UC6

 

Packing for Piston
Special one ring shaped packing for both sides pressure with seal lip. With the same sealing performance as U-packing. Possible to make a piston compact. PWL-Bearings for bearings combined with back-up rings are being prepared.

Material : NBR/FKM
Working Pressure: ≦14 Mpa
Working Temperature: -35°C~+80°C/-10°C~+150°C
Surface Speed : ≦1.0m/s

UF1
UF1

Symmetrical Piston/ Rod U-Cup Seal
This can be used for both piston and rod seals, and has a small section that can be fitted into an integrated groove.

Material : NBR/FKM
Working Pressure: ≦14 Mpa
Working Temperature: -35°C~+80°C/-10°C~+150°C
Surface Speed : ≦1.0m/s

UF2
UF2

TPU Symmetrical Piston/ Rod U-Cup Seal
This can be used for both piston and rod seals. It has a large section and can be used for a wide range of operations, with excellent wear resistance and sealing ability.

Material : ESTER TPU
Working Pressure: ≦35 MPA
Working Temperature: -30°C~+80°C
Surface Speed: ≦0.8m/s

UF4
UF4

TPU Symmetrical Piston/Rod U-Cup Seal
Used for both piston and rod seals, this packing has a small section and can be fitted in an integrated groove. Improved design prevents damages caused by back pressure.

Material : ESTER TPU
Working Pressure: ≦21 Mpa
Working Temperature: -30°C~+80°C
Surface Speed: ≦0.8m/s

UH1
YH1

Symmetrical Piston/Rod U-Cup Seal
The O-Ring energized lips assure a uniform, positive lip contact plus excellent low pressure sealing. Seal depth is equal to radial width. UH1 is used to interchange an existing hydraulic packing and/or O-Rings.

Material : ESTER TPU
Working Pressure: ≦35 Mpa
Working Temperature: -30°C~+80°C
Surface Speed: ≦0.8m/s

UH2
UH2

Symmetrical Piston/ Rod U-Cup Seal
The back beveled sealing lip provides greater film breaking and increased until loading at the sealing surface. Seal depth is generally 1.5 times the cross section of radial width to insure seal stability in most rugged applications. ROD SEAL use is preferred.

Material : ESTER TPU
Working Pressure: ≦35 Mpa
Working Temperature: -30°C~+80°C
Surface Speed: ≦0.8m/s